1.) How Do I Avoid Water Damage?

2.) What do I do When a Pipe Bursts? 

Put Safety First

• Turn off the water at the main valve. You will stop further water damage right then and there (a momentary bright spot because you'll know that things can only get better from here.)
• Assess the burst and the surrounding area to the best of your ability. If the pipe burst has occurred on an upper level, see if the water has already moved (or can move) to a lower level.
• Turn off the electricity to the affected regions of your home. You cannot be "too safe" with this step; the combination of water and electricity can cause shocks, electrocution, and even death. So if you're uncertain, shut down all the power.
• Take photographs of the damage. Naturally, you want to get to work. But take a few minutes to take pictures as you work. You will need them when you submit an insurance claim.

>> Contact Two Pillars Plumbing Today!!

Remove Saturated Items

• Call for plumbing help if you need it, whether it be from the Experts or for a leak contained in one room, a neighbor, or a friend. Without trying to alarm you, understand that you are now competing against the clock since mold can develop in as little as 24 hours.
• Open the windows for ventilation. If you still have electricity, turn on fans to get air circulating and reduce odors.
• Remove anything and everything touched by water, including rugs, furniture, and books. Get these wet items out of the house – don't just set them aside – so that you don't create more work for yourself later. Place wet items on a tarp in your garage or on the lawn.

Remove the Water

• Use a wet vac to start removing the water. Depending on how much water has accumulated, this step could take a while; emptying the vac takes time, too. Keep at it until your efforts come up dry.
• Tend to wood flooring before carpet since it is now susceptible to warping. Check your flooring warranty for emergency care instructions. At the least, wood floors should be dried out thoroughly with fans.
• Pull back sections of waterlogged carpet and padding and train a high-powered fan on the area to dry it out.
• Run a dehumidifier to draw moisture out of the air.

Stem the Damage

• Clean vinyl floors with soap and water. If you fear mold or mildew growth, use bleach, too. Fill a 1-gallon bucket of water and clean ceramic tile with 1 cup of white vinegar and stone tile with 1 tablespoon of Murphy Oil Soap.
• Check your drywall for water damage. If the seams are still intact, the drywall should be fine. If the seams have swelled or separated, you will need more than plumbing help from the Experts; you will need new drywall, too.

3.) What's the First Step to Take When My Toilet is Overflowing?

Step 1: Stop the Rush of Water

• some old towels on the floor, especially if there is a lot of water there, so you don't accidentally slip and fall.
• Remove the lid from the toilet tank and set it down.
• Reach inside the tank and press down on the flapper valve – a rubber piece located in the bottom-center region of the tank. This move will stop water from flowing into the bowl and, by extension, from flowing over the sides.
• Lift on the float to stop the tank from filling. The water level in the bowl should start to drop. After about a minute, the water level should return to normal; now, you can let go of the float and let the bowl refill without worrying about it overflowing. But keep an eye on it, just in case.
• If the water level doesn't start to drop after about a minute, keep holding onto the float while you shut off the water at the toilet supply valve. This is where things can get tricky, but not for long: the valve is usually located near the floor or on the wall behind the toilet. Turn it clockwise to close it. If you cannot hold onto the float and reach the valve simultaneously, release the float and close the valve as quickly as you can.

Step 2: Investigate the Scope of the Plumbing Problem

• Test the other plumbing fixtures in the bathroom to see if they are working as they should.
• Check the other toilets in your home to see if they flush properly. A toilet can overflow for several reasons, including: a problematic septic field (if your home is on a septic system); a blocked trap, an S-shaped device located between the bowl and the drain line which is supposed to keep the drain from clogging in the first place; a clog in the pipes inside your home; a clog in the pipes leading outside your home, including the main sewer line, which can be disrupted by the root systems of trees; or a low-flow toilet, which generally means older models. Most often, toilets overflow because they cannot process a foreign object (such as a children's toy) or an influx of material (such as tissue).
• Call Two Pillars Plumbing the minute you encounter anything troubling or suspicious. You're not a licensed plumber, but we have a crew of them waiting to help diagnose and fix any plumbing problem in your home.
•  If only one toilet is affected, chances are that it is blocked. And you can attempt to unclog it yourself.
• Step 3: Try to Unclog the Toilet and Clean Up
• Place the toilet plunger cup at the center of the hole in the toilet bowl. Exert slow pressure at first, then gradually increase the pace and pressure of your movements until the clog is dislodged and the toilet flushes freely.
• Clean up large amounts of water with a wet/dry vacuum. Old towels should suffice for more minor spills. Ensure that you dry out smaller spills. Ensure that you dry out any soaked areas – and disinfect them with bleach – so that you don't develop a mold problem.

4.) What Quick Fixes Can I do for a Clogged Pipe?

Toilets

A clogged toilet is generally a big mess and not fun to deal with. The easiest way to unclog a stopped-up toilet is with a plunger. Ensure there is enough water in the bathroom to cover the head of the plunger or it won't work correctly. Add water using a bucket or other container if there is not enough water. Don't flush the toilet as it might overflow. The back-and-forth action of the plunger may cause the clog to break loose. If not, you can try a plumber's snake but be warned, this will be a very messy job.

Kitchen sinks

Kitchen sinks are usually stopped up by grease that has cooled and expanded in your pipes. That grease then catches other particles and adds to the problem. The best way to prevent issues with your kitchen plumbing is to keep the sink from getting clogged in the first place by not putting grease down the drain. Once clogged a plunger can be used to try and unclog the drain. The plumber's snake can again be used as it might quickly clear the pipe. Again, Drano or something similar can be used, but be very careful using this product.

Bathtubs

Your bathtub may have the same issue as the bathroom sink, hair. Pull off the grate that covers the drain and try the same things as you would with a bathroom sink. This will hopefully work and keep your bathroom plumbing working efficiently.

Larger pipes

If one of the larger pipes in your home is clogged, this might be a more significant issue. A plunger and the plumber's snake can be tried but the clog might be more than these can handle. Drano is a real issue here also. The amount of substance you have to pour in your system to unclog the drain might damage your pipes. You might be forced to call a plumber.

5.) What are the Warning Signs My Plumbing May Need Repairs? 

1.  Higher water bills - If you have yet to make any big changes in your water usage and your bill spikes, you have an issue somewhere. Many leaks, even significant ones, occur in walls and other areas where you don't have good access. You may not even notice the leak.

2.  Water pressure drop - Water pressure may drop in your home unexpectedly. If this is not an area-wide issue and only specific to your plumbing the Kansas City Area, you need to look into the cause of this. It could be an issue in one part of your home if the drop occurs only in a small part of your home. If the problem occurs throughout your home, you can have an issue at your water main.

3.  Water heater not reliable - If the hot water in your home is not reliable, then you have to look into what is causing the issue. There could be sediment in the heater or in your water lines, or both. Your water heater could be undersized also. 

4.  Extra green grass - A section of your grass may grow faster, greener and lusher than the rest of the lawn. This could be an indication of a leak in a sewer line. There might be a peculiar odor in the area, also.

5.  Stains and damp areas on ceilings and walls - This issue could be a leak in the roof or exterior walls in your home or an issue with your plumbing. Don't just wipe the water away and forget about it. Since the leak is out of sight, if could be a more significant issue than you think. 

6.  Uneven water levels in toilets - This issue usually indicates a problem in a sewer line. The line could be broken, or tree roots may have grown inside. If left alone, this issue could affect your basement and your home's foundation.

7.  Leaks get worse - You might overlook a small leak. But leaks usually get worse over time. This could lead to substantial repair bills and early plumbing replacement. 

8.  Cracks only lead to more and bigger cracks - At times, you might find a little crack in your plumbing system. While this may not be an issue at the time it generally gets worse as time wears on. Cracks will lead to more and bigger cracks. Your problem won't get smaller; it will only get bigger. 

6.) Should I Fix a Leak Myself?

Some considerations...

Before you attempt to fix any plumbing leak yourself, there are a few things you should keep in mind. Knowing these could save you from a plumbing disaster. 

• Know where the main cutoff valve for the water is in your home. If something goes wrong, you will at least be able to cut the water off until help arrives.
• There are devices you can hook up to the plumbing system that alerts you when more significant amounts of water are being used. These will even cut the water off for you if massive leaks occur.
• You can put individual cutoff valves around your home to isolate some areas. This way, you don't have to turn the water off to the entire house. 
• You will have to judge the size of the leak. If it's too large, just call a plumber.

DIY fixes for leaks before calling Two Pillars Plumbing 

 Below are a few things you can try if you have a plumbing leak. These are easy and could save you from a large repair bill. Again, inspect the leak and determine if a DIY fix is in order. 

Tape

Several kinds of tape can be wrapped around a small leak. Duct tape and electrical tape can be used. Take care to cover the entire leak. Also, make sure the tape makes good contact with the pipe so no pockets form where water can gather. This might cause the tape to lose its grip.

Epoxy

This material works best at joints and fittings. Before applying it to the leak, drain the water, dry the pipes, and clean the area with steel wool. Epoxy makes a very tight seal.

Pipe clamp

Make sure your clamp is the correct size for the pipe. Wrap the leak area in a rubber pad first. Screw the clamp over the rubber pad. This method will also help stop more significant leaks, but if the leak seems out of your control, it's best to just call Two Pillars Plumbing.

Hose clamp

A hose clamp works the same way as a pipe clamp but it is used on smaller leaks. Again, wrap the leak with a rubber pad and screw on a hose clamp, or even several, over the rubber pad. 

C-Clamp and block

A c-clamp and a small block of wood can be used to stop a small leak. To start with, a small rubber pad needs to be put over the leak. Then a small block or strip of wood is put over that. The c-clamp is used to hold it all in place. The block of wood protects the pipe from the pressure of the clamp. 

Teflon tape

If a faucet is leaking, this can be tricky. It might be stripped, and you will have to replace it. Unscrew the faucet after turning the water off. Try some Teflon tape around the threads. This might stop the leak. 

If you are uncomfortable trying these repairs alone, you can always call Two Pillars Plumbing.

7.) What is a Tankless Water Heater? 

Tankless water heaters are much smaller – about the size of a suitcase – and so are less obtrusive than conventional water heaters. But they also offer a limited flow of hot water per minute and cost more upfront – issues you might be able to reconcile in the long term. It's Not Pretty, But it Works.

Your water heater is like a reservoir – storing between 20 and 80 gallons of water at a time and delivering it when you turn on a hot water faucet. It releases this hot water from the top of the unit; to replace it, cold water enters the bottom so that the tank always stays full.

The operation sounds logical until you consider that water is constantly heated in the tank – even when a hot-water faucet in your home hasn't been turned on. The result is what the U.S. Department of Energy refers to as "standby heat loss" – a wasteful condition that costs you money every month.

You can insulate your water heater to stem some of this loss – or the Experts can do it for you. But a tankless water heater sidesteps this problem even more effectively.

Add up the Savings with a Tankless Water Heater

When you turn on a hot water faucet with a tankless water heater, cold water travels through a pipe and into the unit, where it is heated by coils and delivered right where you need it – right on demand. Without standby heat loss, the monthly energy savings can add up. The department estimates that tankless water heaters:

• It can be between 24 and 34 percent more energy efficient for homes that use 41 gallons or less of hot water a day
• It can be between 8 and 14 percent more energy efficient for homes that use a great deal of hot water, or about 85 gallons or more of hot water a day
• Result in an average annual savings of about $100
• Can achieve even more significant savings – up to 50 percent – if one is installed at each hot water outlet in a home

Let Two Pillars Plumbing help you decide if a tankless water heater is suitable for you and your home plumbing.

8.) Where is the Water Shut Off Valve for My Plumbing?

Do you, and every family member, know where the shut-off valve is for the water supply to your home? Chances are the answer to that question is a big no!

In the case of a plumbing emergency, each member of your family must know where the shut-off valve for the home's water supply is located and how to turn it off. How important is everyone knowing how to cut the water off quickly?

Turn your water supply off quickly in an emergency

In a water emergency, many gallons of water can flow into your home quickly. A 3/4" pipe at average water pressure can dump 23 gallons of water per minute into your home. Think about that for a second.

If it takes 15 minutes to find the water valve to cut it off, 345 gallons of water will have flowed into your home. What if you can't find the shut-off and have to call for help? If it takes help an hour to arrive that's 1,380 gallons of water that has flowed into your home. Truly catastrophic!

What's the plan?

The plan is a simple one. Please make sure you, and everyone in your family, know where the shut-off valve is for your plumbing and how to turn it off. Don't take any chances here. If you are not 100% certain how to do this call a plumber. For peace of mind for you and your family, it is better to call a professional to help you out in the matter. 

9.) Should I Tackle a Plumbing Job Myself? 

Ask Yourself these Questions First:

Do I have the necessary tools?

While many of the tools a plumber uses are ordinary and familiar, several types of augers and plungers are not. If you have to go out and buy any tools, this may make the cost of your do-it-yourself job more than calling a plumber.

Do I have the needed materials?

When a plumber comes to your home to do a job, they usually have most of the items needed to do your job in their work truck. Smaller pipes and fittings, faucets, valves, and other common plumbing materials are carried by plumbers. You may run to the home improvement store to get all you need to do the job. This will take both time and money.

Do I have the time to do the job?

The plumber goes around fixing people's plumbing issues full-time. That's his job. You probably have a full-time job, so when will you get around to fixing the problem with your plumbing in the Kansas City Area? If it's an emergency, you must take time off from work. Otherwise, you will have to work on your issue after work or on the weekend. Can your problem wait so you can fix the issue in your "free" time?

Do I have the skills to do the repair?

There is a certain amount of skill required to be able to do some, or even most, of the things required to repair your plumbing. Most people generally do not take things apart, fix them, and put them back together. The amount of skill necessary to do your plumbing job might be beyond your reach.

Do I have the knowledge to do the job?

Even if you have just about everything you need to do the repairs to your plumbing in the Kansas City Area, you will have to decide if you have the know-how to perform what needs to be done. Many plumbing jobs are very specialized. Changing out a toilet, fixing a leaking pipe or installing a new water heater requires technical knowledge. Are you up to the task?

Do I have the money to pay if I get it wrong the first time?

This may be the most important question of all you have to answer. You might turn a $300 repair into a $1000 repair if something goes wrong and you have to start the project over again. Be prepared to pay big time in case things don't go according to plan.

Taking On That Plumbing Job

If you plan on tackling an issue with your plumbing in the Kansas City area, start by asking yourself the questions above. Be very honest with your answers and really think about what you are getting into.

If you have any doubts don't hesitate to call Two Pillars Plumbing . Plumbing is not an easy thing to fix and it generally requires special tools, knowledge and skills.